WOODEN FLOOR REINFORCEMENT
REINFORCEMENT OF WOODEN FLOORS WITH LPR® SYSTEM
WHERE YOU CAN USE IT
Type of building
Usable on existing and new floors to be reinforced.
Easy to apply! For each floor, installation sheets are provided.
Each intervention is personalized and focused on the specific problem.
TYPES OF REINFORCEMENT
The “LPR® System and FLAP® Connector” are the answer of Peter Cox‘s research to the problem of consolidating wooden floors.
The system consists of a series of integrated and specific solutions for individual problems, depending on the composition of the floors in simple frames or with intermediate beams.
The connection system guarantees a deflection of less than 1/500 of the span, which can also be applied to new solid or laminated wood floors. The theory is supported by numerous test certificates performed on site and in the laboratory.
The TRALICCIO LPR® and FLAP® Connector, which have obtained the CE marking, comply with the seismic regulations relating to steel components for structural reinforcement of floors.
Continuous metal trellis in 3 meter long bars that can be overlapped with variable heights from 35mm and 160mm.
Cylindrical connector with variable diameter and height, designed on the basis of the characteristics of the double frame floor to be reinforced.
With TRALICCIO LPR® System on floor
The new Technical Standards for Constructions in force since 2009 reiterate that the floors of masonry buildings must fulfill the important function of distributing the horizontal actions between the structural walls and, therefore, must be well connected to the walls and ensure adequate functioning at diaphragm.
In order for the masonry building to have an overall box-lik behavior, the walls and horizontals must be suitably connected to each other. The structural element dedicated to this task is the curb.
The anti-seismic node used by Peter Cox® is specially designed to perform this function.
Microperforated polyethylene sheet, permeable to water vapor with polypropylene reinforcement mesh.
The specific screws with wood thread DIN 571, have variable diameters and lengths, are produced for Peter Cox® and have a tapered underhead for a safe “fusion” with the LPR® Truss.
WHY CHOOSE PETER COX®
The TRALICCIO LPR® System and FLAP® Connector are produced and distributed directly by Peter Cox®.
We offer assistance in the design of the intervention, with a budget calibrated on the structural technical specifications.
With the product you will receive a practical Installation Guide and assistance during installation.
Sending the form above, you are consenting to the processing of personal data pursuant to the European Data Protection Regulation GDPR 2016/679.
VIA DELLA CONSORTIA, 3
+39 045 8303013